Apex Lowering Springs - BMW 3 Series E90/92 Saloon/Coupe 6 cyl. Diesel & 335i - 03.05 on - Apex Spring Kit Type - 390L/392C Lowers - 35mm Part Number = 20-1450 Notes:- TUV Approved Use manufacturers settings when checking and adjusting alignment. Cannot be fitted to cars with self-levelling suspension.
Apex Lowering Springs - Volvo 850 Estate incl. Turbo/T-5/T5-R/TDI & V70 - 92-96 - Apex Spring Kit Lowers - 40mm Part Number = 250-2010 Notes:- Use manufacturers settings when checking and adjusting alignment. Cannot be fitted to cars with self-levelling suspension.
Gates Cambelt Kit - GTO/3000GT Complete Cambelt kit consisting of 1 x Gates Timing Belt 1 x Cambelt Tensioner Bearing 1 x Idler Pulley Gates Belts OE quality as it gets without the Dealer Pricetag Bearings are OE Manufacturers such as KOYO NTN NSK GMB Mitsubishi Part Number Cambelt MD161427 MD193874 Tensioner Pulley MD140071 Idler MD151447 MD319022
Front Bottom Wishbone Arm - Mitsubishi FTO GPvR Fits ALL GP version R models Exploded Diagram HERE Mitsubishi Part Number LH= MR344277 RH= MR344278
DISCONTINUED - NO LONGER SUPPLIED BY MITSUBISHI
Brake Master Cylinder MR129911 With ABS - Colt CJ4A 1.6 Mivec Mirage/Cyborg
Aftermarket Brake Master Cylinder for Vehicles with ABS Please supply Full Vin Number
Mitsubishi Part Number MR129911
Lefthand Engine Mount to fit Mitsubishi FTO V6 DE3A ALL 4 Speed Tiptronic/Automatic Models built up to 31/01/1997 Exploded Diagram HERE Use THIS HERE to choose the correct mounts for your FTO V6 Mitsubishi Part Number MR197615
Ford Anglia 105E
Superflex Front Anti Roll Bar to Track Control Arm Kit of 4 Bushes, 2 Stainless Steel Tubes & 4 Special Stainless Steel Washers, 105E, replaces OEM# 105E-3096-A Superflex Part Number = SF128-1165KSS
Ford Granada MK1/2
Front Subframe Upper Rear Kit of 2 Bushes Bonded to Offset 102mm Long Stainless Steel Tubes Superflex Part Number = SF130-2076KSS
TEIN S TECH LOWERING SPRINGS - Mitsubishi Lancer Evo 4-5-6 Type CN9A/CP9A Lowers EVO 4 - 42mm Front and -30mm Rear Lowers EVO 5 & 6 - 30mm Front and -23mm Rear ALL are Spring Rates of 207lb F and 230lb R Kit Part Number = SKR38-AVB00
Stepper Motor - Idle Speed Controller - Mitsubishi Lancer GSR 1.8 4WD Turbo CD5A If your idle speed is going haywire, up and down and very erratic then this could well be the culprit. This new type Black Stepper Motor replaces the old style one HERE This part is Special Order (Approx 10-14 Days to obtain) Mitsubishi Part Number MD628052 MD614367 E9T15293C
Inlet and Exhaust Valves - Full Set of 16 - Mitsubishi Colt CZT 1.5 Turbo Z37A
Made in Japan - Top Quality Aftermarket Valves as good as the Original items at less than half the price.
Approx 10-14 days to obtain.
Mitsubishi Part Numbers Inlet = MD314436 x 8 Exhaust = MD314437 x 8
