Rear ECS Replacement Shock Absorbers - PAIR Mitsubishi GTO/3000GT Models with ECS ONLY
ONLY For ECS Equipped Models (Will NOT fit Non ECS Models)
These are used if you are having to get rid of the ECS (Mitsubishi No Longer Supply ECS Shockers) These Replace the ECS Shockers with a Non ECS Version KYB Part Number 341185 x 2
Notes:- ECS Models THESE ARE NOT ECS SHOCKERS YOU NEED TO REMOVE THE ECS ON THE CAR TO FIT THESE 1. Remove front and rear shock ECS Adjusting activators. 2. Unplug control module behind right rear trim panel in boot.
Radiator - Mitsubishi GTO/3000GT
This radiator fits both Auto Gearbox and Manual Models. Manual Models - Don't use the built in Auto Box pipes. Also has correct Threaded inserts for the two temperature sensors to fit the 1991-1992 cars - leave blanked off if later car.
Mitsubishi Part Numbers MB605452 MB605453 MB605454 MB605455 MB660472 MB924242 MB924243 MB924244
Aftermarket Alternator 110 AMP - GTO/3000GT
Quality Replacement Alternator. 12 month warranty. No Surcharge - we do NOT need your old Alternator. 3-4 Working Days to Obtain
Mitsubishi Part Numbers MD150657 MD197470 MD324755 MD354815
KYB Front Shock Absorbers - Mitsubishi 3000GT/GTO
These will fit ALL Models both NON ECS and ECS BUT To replace ECS Shockers you will have to Disconnect the ECS see notes below
Sold as a Pair
KYB Part Number 335013 x 2
Head Gasket Set - Mitsubishi GTO/3000GT NON Turbo Models (Both Z15A and Z16A Normally Aspirated )
Gaskets required to refurb the Cylinder Heads Not a Genuine Gasket Set but then it's not £700
Mitsubishi Part Number MD997640
Joint Kit for Propshaft - Mitsubishi GTO Non Turbo Models both Z16A and Z15A This is a common propshaft shaking problem along with the bearing, bushes or poor propshaft alignment due to incorrect shimming. See location fitted HERE SPECIAL ORDER - 3-4 WEEKS TO OBTAIN
Mitsubishi Part Number MB837300 MB505101
TEIN Flex Z Coilover Kit - Mitsubishi GTO/3000GT Twin Turbo Z15A/Z16A The TEIN Flex Z coilover kit is an affordable, street ready kit with a Twin tube internal construction. Ride height adjustments are made by moving the lower spring seat either up or down with 16-stage damping force adjustments made via the click adjuster positioned on the top of the coilover. Includes TEIN top mounts.
Made in Japan, every TEIN kit application is test fitted and road tested by highly trained suspension engineers to ensure the best possible balance between comfort and performance on the road.
KIT NOTES Not tested on Non Turbo Models so Non-turbo/na vehicles may not be lowered as much due to lighter weight.
SCREENSHOT FROM TEIN WEBSITE - HERE
Product Features: Twin tube damper design 16-stage damping adjustment Full length ride height adjustable system Includes top mounts Powder coated damper body with zinc coated coilover section Fully serviceable
VSR74-C1SA4 Note: The product images shown are for illustration purposes only and may not be an exact representation of the product.
Fits Vehicles
