Front Bottom Arm Rear Bush including bracket - Mitsubishi Lancer Evolution 1 CD9A Exploded diagram HERE Mitsubishi Part Number LH = MR130235 RH = MR130236
DISCONTINUED - NO LONGER SUPPLIED BY MITSUBISHI
Rear Bottom Arm the one the shock absorber bolts into. Fits Mitsubishi EVO 1 CD9A with THIS type of Rear Droplink Exploded Diagram HERE Mitsubishi Part Number LH = MR197607 RH = MR197608
Rear Bottom Arm the one the shock absorber bolts into. Fits Mitsubishi EVO 1 CD9A with THIS type of Rear Droplink Exploded Diagram HERE Mitsubishi Part Number LH = MR197605 DISCONTINUED - NO LONGER SUPPLIED BY MITSUBISHI RH = MR197606 DISCONTINUED - NO LONGER SUPPLIED BY MITSUBISHI
Rear Lateral Arm - Long Dogbone - Mitsubishi Lancer Evolution I CD9A These are to be fitted as a pair to EVO 1 - they cost less as a pair than one of the older style ones.
WE HAVE 8 LEFT IN STOCK Exploded Diagram HERE Mitsubishi Part Number MR197604 MR197032 Replaces MB910366 MB910367
Mitsubishi Lancer Evo 1, 2 & 3 CD9A CE9A Superflex - Rear Trailing Arm Front Kit Replaces Mitsubishi Part Number MR102063
Standard colour is now BLACK
Superflex Part Number = SF259-1574KSS
Mitsubishi Lancer Evo 1, 2 & 3 CD9A CE9A Superpro - Front Wishbone Rear Kit, Caster adjustable (Double Offset) Superpro Part Number = SPF2026K
Mitsubishi Lancer EVO 123 CD9A CE9A Superpro - Rear Dogbone Arm T Bar Bush Kit You need 2 kits to do all the T Bar bushes on the 4 Dogbone arms and you also need 1 kit of SPF2027K and 1 kit of SPF2291K to do the small end of the dogbone arms Part Number = SuperPro SPF2110K
Polyurethane Engine Mount Bush Kit - Mitsubishi Lancer Evolution 1 2 3 CD9A CE9A
This kit will increase your throttle response dramatically without too much noise, vibration and hashness. If your not sure what throttle response is then think about how your car will hesitate slightly when accelerating, this kit will remove all the hesitation caused by soft rubber engine mounts.
Replaces the rubber components and collars/sleeves in all 4 engine mounts. Remove the rubber bush with the sleeve around it and these press in either side and include Stainless Centre Tubes. ONLY available in Black Polyurethane. This kit is exclusive to Viamoto
Kit Contains SF0597KSS x 1 SF0598KSS x 1 SF0599KSS x 1 SF0600KSS x 1
Mitsubishi Part Numbers SPF0597KSS = MR103554 Front Mount SPF0598KSS = MR103555 Rear Mount SPF0599KSS = MR103556 RH Upper Mount SPF0600KSS = MR911718 LH Upper Mount
Rear Adjustable Lateral Arms Set of 4 - Mitsubishi Lancer EVO 123
Complete set of Lateral Dogbone Shaped Arms for Rear of Car Fully adjustable allows a much bigger range of adjustment than Standard. Perfect for Fast Road and Track Cars.
These have to to be set-up using a proper Garage 4 wheel alignment system. Cannot be set up accurately by a home fitter.
Exploded Diagram Shows Locations Used HERE
Replaces Mitsubishi Part Numbers MR197603 x 2 MR197604 x 2 EVO 2/3 MB910841 MB910842 MB910366 MB910367 EVO 1
