Gates Cambelt Kit - GTO/3000GT Complete Cambelt kit consisting of 1 x Gates Timing Belt 1 x Cambelt Tensioner Bearing 1 x Idler Pulley Gates Belts OE quality as it gets without the Dealer Pricetag Bearings are OE Manufacturers such as KOYO NTN NSK GMB Mitsubishi Part Number Cambelt MD161427 MD193874 Tensioner Pulley MD140071 Idler MD151447 MD319022
Sump Oil Level Sender - Mitsubishi 3000GT
Fits into sump HERE
Only fits certain models - Send VIN/Chassis No. If unsure
Mitsubishi Part Number MD302293 (Was MD169507)
Rear 297mm Brake Discs - Mitsubishi GTO/3000GT
These are generally fitted to later GTO's/3000GT's after end of 09/1992
MEASURE YOUR DISCS DIAMETER IT WILL EITHER BE 284mm OR 297mm
Mitsubishi Part Numbers MB895363
Front 314mm Brake Discs - Mitsubishi GTO/3000GT
MEASURE YOUR DISCS DIAMETER IT WILL EITHER BE 296mm OR 314mm
Mitsubishi Part Numbers MB928897 MR235802 MR235803
Rear NON ECS Shock Absorber MB631739 - Mitsubishi GTO/3000GT
This shocker ONLY fits Non ECS Models with 4WD/AWD Not available as an aftermarket part Only available as Genuine Mitsubishi Part hence the price
SOLD AS A SINGLE SHOCK ABSORBER
Special Order from Japan - Approx 3-4 weeks
Mitsubishi Part Number MB631739
Crank Angle Sensor - Mitsubishi GTO/3000GT 1990-1992 (2 Bolt Main Bearing Engine ONLY)
Bought in from USA, Aftermarket Part at a reasonable price. Genuine Part is No Longer Made by Mitsubishi. Exploded Diagram Showing Location Fitted HERE
Mitsubishi Part Number MD153464
Rear ECS Replacement Shock Absorbers - PAIR Mitsubishi GTO/3000GT Models with ECS ONLY
ONLY For ECS Equipped Models (Will NOT fit Non ECS Models)
These are used if you are having to get rid of the ECS (Mitsubishi No Longer Supply ECS Shockers) These Replace the ECS Shockers with a Non ECS Version KYB Part Number 341185 x 2
Notes:- ECS Models THESE ARE NOT ECS SHOCKERS YOU NEED TO REMOVE THE ECS ON THE CAR TO FIT THESE 1. Remove front and rear shock ECS Adjusting activators. 2. Unplug control module behind right rear trim panel in boot.
Radiator - Mitsubishi GTO/3000GT
This radiator fits both Auto Gearbox and Manual Models. Manual Models - Don't use the built in Auto Box pipes. Also has correct Threaded inserts for the two temperature sensors to fit the 1991-1992 cars - leave blanked off if later car.
Mitsubishi Part Numbers MB605452 MB605453 MB605454 MB605455 MB660472 MB924242 MB924243 MB924244
Aftermarket Alternator 110 AMP - GTO/3000GT
Quality Replacement Alternator. 12 month warranty. No Surcharge - we do NOT need your old Alternator. 3-4 Working Days to Obtain
Mitsubishi Part Numbers MD150657 MD197470 MD324755 MD354815
Exedy Clutch Kit - 3 Part - Mitsubishi Twin Turbo GTO/3000GT
250mm Exedy Clutch Kit - Fits ALL Twin Turbo Models Comprising:- Clutch Cover Clutch Plate - 23 Spline Clutch Bearing
Mitsubishi Part Numbers MD742801 MD741324 now MR111650 MB837549
Front Bottom Arm Bush Kit - GTO/3000GT Mk1 up to 09/1993 Complete set of Polyurethane Bushes to Repair Both LH/RH Mk1 Arms (Series 1)
See exploded diagram HERE AND HERE Showing Which Type of Arm this kit fits Only fits early arms 09/1993 or before with Rear Bush OEM Part No's. MB633620, MB633621, MB910735, MB910736
Kit comes with Standard Balljoints.
Mitsubishi Part Numbers Replaces Bushes in MB698851, MB698852
KYB Front Shock Absorbers - Mitsubishi 3000GT/GTO
These will fit ALL Models both NON ECS and ECS BUT To replace ECS Shockers you will have to Disconnect the ECS see notes below
Sold as a Pair
KYB Part Number 335013 x 2
Head Gasket Set - Mitsubishi GTO/3000GT Twin Turbo Models (Both Z15A and Z16A Twin Turbo)
Gaskets required to refurb the Cylinder Heads and Main Gaskets for Turbos Not a Genuine Gasket Set but then it's not £700
Mitsubishi Part Number MD997669
TEIN Flex Z Coilover Kit - Mitsubishi GTO/3000GT Twin Turbo Z15A/Z16A The TEIN Flex Z coilover kit is an affordable, street ready kit with a Twin tube internal construction. Ride height adjustments are made by moving the lower spring seat either up or down with 16-stage damping force adjustments made via the click adjuster positioned on the top of the coilover. Includes TEIN top mounts.
Made in Japan, every TEIN kit application is test fitted and road tested by highly trained suspension engineers to ensure the best possible balance between comfort and performance on the road.
KIT NOTES Not tested on Non Turbo Models so Non-turbo/na vehicles may not be lowered as much due to lighter weight.
SCREENSHOT FROM TEIN WEBSITE - HERE
Product Features: Twin tube damper design 16-stage damping adjustment Full length ride height adjustable system Includes top mounts Powder coated damper body with zinc coated coilover section Fully serviceable
VSR74-C1SA4 Note: The product images shown are for illustration purposes only and may not be an exact representation of the product.
Fits Vehicles
