Superflex - Triumph 2000/2500/Pi 63-77 Front TCA Inner Kit Camber Adj

Triumph 2000, 2500 & Pi (1963 - 1977)
Superflex - Front Track Control Arm Inner Kit of 2 Bushes, 2 5.5mm Offset Stainless Steel Tubes, 4 Bolts & 2 Lock Nuts, to correct anomolies in suspension geometry, Road option (Blue), replaces OEM# 138885

Adjustment is achieved by bottoming out the longer bolt in the crush tube, continued turning clockwise will cause the crush tube to rotate. Once adjustment is achieved, tighten the short bolt, and lock the nut up tight to the cross member on the long bolt.

Superflex Part Number = SF373-0137-80CKSS

Why SuperFlex ?

• The base material used in manufacturing SuperFlex Bushes is of a higher specification (but consequently more expensive) than that of other brands.
• Four Different Hardness Grades with the appropriate grade used depending on the loads put through them and the location used.
• Majority of the Steel used in the tubes and fittings is stainless rather than zinc-plated.
• SuperFlex have over 30 years experience of Manufacturing Polyurethane Bushes.
• Superflex Bushes are covered by a Full 3-year road warranty.

SuperFlex polyurethane bushes are unrivalled - a real value long term benefit to the feel of your car.